The conversion unit is developed around the top-of-the-line Analog Devices converter, the AD1955, and an upsampling circuit that raises the resolution of digital data to 24 bit/192kHz based on an Analog Devices AD1896 integrated circuit. The entire digital signal conversion system is mounted on an independent printed circuit board that can be easily removed and replaced in case of technological updates, without having to change the entire player.
Thanks to the high sampling frequency, it was possible to use a first order analog filter made up of a metal film resistor and an exceptionally high quality silver mica capacitor.
The analog output stage is based on the Nova proprietary circuit that uses JFET as active devices and is characterized by a single gain stage and the total absence of any feedback. The individual active components are selected individually.
For the digital and the control circuits and for the signal handling circuits, the power supply, starting from two toroidal transformers, is completely independent. A particular system has been adopted for filtering the power supply of the conversion and the analog units; a system that significantly reduces reciprocal noise between the various circuits. Consequently, the sound obtained is harmonically richer and the sound fade-out more natural.
The passive components used include high quality parts such as electrolytic capacitors, with extremely low internal impedance, polypropylene capacitors and low-noise metal film resistors. Each individual component has been chosen according to the real sound quality, determined through numerous listening tests.
Sample Rate: 192 kHz
Nominal mains voltage: 230V (180V ÷ 280V)
Resolution: 24 bit
Quiescent Consumption: < 20 W
Output Impedance: 350 Ohms
Dimensions: 440 x 370 x 110 mm (WxDxH)
Harmonic Distortion (THD): <0.02%
Weight: 14 kg
Output Voltage Swing: 1.8 V RMS
Chassis Material: Aluminium