What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Aiwa XA-005


Specifications XA-005
Power Section
Effective Output Power:
70 W +70 W at 4 Ω, (THD 0,9%, 1kHz)
50 W +50 W at 8 Ω,  (THD 0,9%, 1kHz)
Total Harmonic Distortion:  0,05% (20Hz - 20kHz, 40 W, 8Ω)
Output Bandwidth:  20 Hz - 200 kHz (less than 0,05%)
Frequency Response:  5 Hz - 100 kHz, +0,5 dB -3 dB
Pre-amp Section
S/N Ratio (IHF A curve short circuited):
Phono MM : 85 dB (5 mV input)
Tuner, DAT, Aux, Tape:  100 dB
Input Sensitivity/Impedance:
Phono MM : 2,5 mV/47 kΩ
Tuner, DAT, Aux, Tape : 150 mV/47 kΩ
Phono MM Overload level:  85 mV (1kHz, THD 0,01%)
Output Level/Impedance:
Tape/DAT : 150 mV/47 kΩ
Headphones : 8 - 32 ohms
Speakers : 4 -16 Ω  (A + B : 8 - 16 Ω )
RIAA Deviation:  ±0,5 dB (30Hz - 15kHz)
Power Requirements [E,Z]:  Switchable 120/220/240 V, 50/60 Hz [220 V, 50 Hz]
Power Consumption [E,K,Z /H]:  350 W/ 125 W
Dimensions (W x H x D):  430 x 140 x 320 mm

Weight:  7,0 kg

Nessun commento:

Posta un commento